Poland's Print Extra installs six-color Komori Lithrone G40 Advance with coater, UVL drying to meet increased demand for packaging production; press comes with FAPC Simultaneous Plate change, PQA-S inline Print Quality Assessment system

Sample article from our Printing & Publishing

December 13, 2023 (press release) –

Poland’s Print Extra has installed a six colour Komori Lithrone G40 Advance with coater and UVL drying to accommodate its increased demand for packaging production. The company was established in 1993 in Lodz – Poland’s third largest city, noted for its extensive higher education institutions and now for its burgeoning reputation as an emerging multi-industry technologies hub.

 

Print Extra, jointly owned by Maciej and Robert Pospiech, installed its first Komori, the four colour B2 Lithrone S29 in 2015, primarily for commercial print and it was the Lithrone’s H-UV fast drying low energy technology which helped Print Extra to introduce packaging production into its portfolio.

So much so, that in 2018 the company installed another B2 Komori, this time what was Poland’s first GL29 Lithrone – with five printing units, coater and with the added flexibility of hybrid H-UVC.

Says Maciej Pospiech: “With the GL29 we made substantial inroads into the packaging market, giving us the confidence to introduce more packaging-focused equipment into our finishing lines including die-cutting and a folder-gluer.”

Adds Robert Pospiech:” The UV technologies of the five colour GL29 enabled us to add special colours and different varnish finishes and it’s what gave us a stronghold in the packaging market. Despite Covid, which adversely affected the demand for commercial print, the call for packaging production increased strongly and, as we increased our packaging client base across Poland and beyond, we knew that the packaging sector was the key to the company’s future development.”

Maciej Pospiech: “This had far-reaching consequences. To capitalise on our planned future investments, expansion and consolidation of our headquarters was needed, with an enlarged machine park to accommodate the additional press, pre-press, and packaging-specific finishing equipment. Our recently completed reconstruction has tripled the size of our production area and also created more warehousing for raw materials to ensure we are always able to deliver quick response times and to provide, if necessary, storage for part orders of bulky packaging print, to relieve the pressures on customers’ own storage facilities.”

The Packaging Specification Advance

The new six colour Lithrone Advance G40 at Print Extra has Komori’s packaging print specification with Komori’s FAPC Simultaneous Plate change, Komori PQA-S inline Print Quality Assessment system and the PDC-SX Spectral Print Density Control. The press runs at speeds up to 16,500 sheets an hour – amongst the major benefits which influenced Print Extra’s decision to add a B1 press to its machine firepower.

Explains Robert Pospiech: “ As high volumes of packaging print started to feature more prominently on our production schedule, we had no doubts that extra printing capacity was essential. Our first thoughts were to add another B2 press but when we looked at the new B1 Lithrone Advance Series and, in particular, when the Komori and Reprograf-Grafikus teams introduced us to the packaging version, its productivity and control technologies were decision changers for us.

“It had everything we considered a packaging production machine should have. The additional plinth to increase feeder and delivery pile heights, the inline optical inspection camera, the spectral density control, the automated plate change, varnishing options – and critically, every streamlined aspect of press management.

“We could see that not only would it massively increase our output but also improve our competitiveness. That has held true - now, even runs reaching hundreds of thousands integrate smoothly into our schedules. The flexibility to produce on a full range of packaging substrates and add a whole variety of hybrid and UV varnish finishes also gives our design team the opportunity to propose new added value creative ideas for our clients’ packaging. Even more so, since we added, along with B1 die-cutting and folder gluing, new high speed finishing facilities such as saddle-stitching, foil stamping, further binding options and laminating.”

 Print Extra’s have maintained a growth rate of 30% before and since the installation of the Lithrone Advance and, as Maciej Pospiech reports: “Almost every week new customers provide us with the opportunity to explain to them how our investments such as the Lithrone Advance, under our philosophy - Printing for Business - are all, in reality, for the benefit of their businesses!”

 

Source: Swiat Poligrafii Professional

https://www.printnews.pl/poligrafia-dla-biznesu-print-extra/ 

 
 

* All content is copyrighted by Industry Intelligence, or the original respective author or source. You may not recirculate, redistrubte or publish the analysis and presentation included in the service without Industry Intelligence's prior written consent. Please review our terms of use.

See our dashboard in action - schedule an demo
Jason Irving
Jason Irving
- SVP Enterprise Solutions -

We offer built-to-order printing & publishing coverage for our clients. Contact us for a free consultation.

About Us

We deliver market news & information relevant to your business.

We monitor all your market drivers.

We aggregate, curate, filter and map your specific needs.

We deliver the right information to the right person at the right time.

Our Contacts

1990 S Bundy Dr. Suite #380,
Los Angeles, CA 90025

+1 (310) 553 0008

About Cookies On This Site

We collect data, including through use of cookies and similar technology ("cookies") that enchance the online experience. By clicking "I agree", you agree to our cookies, agree to bound by our Terms of Use, and acknowledge our Privacy Policy. For more information on our data practices and how to exercise your privacy rights, please see our Privacy Policy.