VTT, Aalto University lead industrial chemical recycling project for difficult-to-recycle plastic waste, on €3.0M Business Finland funding; Urban Mill project includes Borealis, Valmet, Corex, Wipak, PR Pulping, Sulapac, and recyclers Kaipola, Keskinen

Sample article from our Government & Public Policy

ESPOO, Finland , October 6, 2022 (press release) –

The recycling rate of plastic waste is today far too low. Mechanical recycling alone will hardly meet the plastics recycling targets set in EU and national legislation. Industrially feasible chemical recycling processes capable to utilize mixed plastic waste are needed to divert plastics away from waste incineration and the environment causing carbon dioxide emissions and littering. UrbanMill co-innovation project is developing enabling technologies to utilise highly mixed plastic waste as feedstock for chemical recycling producing high quality plastic materials complementing current recycled plastics.

Even though plastics have many sustainable advantages as material, the lacking proper waste handling and recycling of plastics cause huge environmental challenges by littering and CO2 emissions. Today in Finland the recycling rate of packaging plastics is about 30% as the new waste law sets target of 55% by 2030. Thus, there is an enormous need to increase the share of the plastic waste that can be industrially recycled back to new high quality plastic materials.

Plastics can be recycled mechanically and chemically and both are needed to meet the recycling targets. Mechanical recycling from the mixed plastic waste leads often to compromised plastic properties and thus recycled plastics cannot be used in many demanding applications, such as food packaging. In chemical recycling, plastics are broken down into starting materials, from which high-quality plastics similar to virgin plastics are made. Plastic waste used for chemical recycling can also be more mixed in quality than the raw material for mechanical recycling.

“Chemical recycling based on pyrolysis is on the verge of an industrial giant leap as new investments to demonstration and production units are frequently announced. However, many of these early demo units are still using relatively pure plastic waste fractions leaving a large share of plastic waste incinerated. UrbanMill project aims to develop enabling recycling technologies for difficult-to-recycle highly mixed plastic waste,” says Mika Härkönen, Professor of Practice at VTT.  

The two-year project of 3 M€ is funded by Business Finland and coordinated by VTT Technical Research Centre of Finland in cooperation with Aalto University. It spans multiple industrial sectors in the plastic recycling value chain and creates strong networks and collaborations between the consortium partners. The UrbanMill is focused to create novel concepts by combining tailored pre- and post-treatment technologies with pyrolysis. The project is closely linked to Borealis SPIRIT and Valmet Beyond Circularity “Veturi” ecosystems. The other participating companies are Corex Finland, Wipak, Kaipola Recycling, Keskinen Recycling, Lamor, PR Pulping, Resiclo, Salpakierto, Sulapac and Suomen Uusiomuovi.

“The UrbanMill project develops a sustainable industrial chemical recycling concept for plastic waste which cannot be mechanically recycled. It supports the Borealis SPIRIT program targets by increasing the plastic recycling rate, providing recycled feedstock for plastic production and aiming at high quality recycled plastic. The cooperation possibilities within the consortium look very promising,” says Jaakko Tuomainen, Manager of circular plastics in Borealis SPIRIT programme.

“New technology solutions are needed to solve the huge plastic recycling problem and to reach the set EU targets. The UrbanMill project aims to develop process concepts to enable better plastic recycling with pre-treatment, pyrolysis and post-treatment. These new solutions are needed in the industry to move forward to a circular economy for plastics,” says Antti Raiko, Project manager of plastic chemical recycling in Valmet Beyond Circularity program.

* All content is copyrighted by Industry Intelligence, or the original respective author or source. You may not recirculate, redistrubte or publish the analysis and presentation included in the service without Industry Intelligence's prior written consent. Please review our terms of use.

See our dashboard in action - schedule an demo
Dan Rivard
Dan Rivard
- VP Market Development -

We offer built-to-order government & public policy coverage for our clients. Contact us for a free consultation.

About Us

We deliver market news & information relevant to your business.

We monitor all your market drivers.

We aggregate, curate, filter and map your specific needs.

We deliver the right information to the right person at the right time.

Our Contacts

1990 S Bundy Dr. Suite #380,
Los Angeles, CA 90025

+1 (310) 553 0008

About Cookies On This Site

We collect data, including through use of cookies and similar technology ("cookies") that enchance the online experience. By clicking "I agree", you agree to our cookies, agree to bound by our Terms of Use, and acknowledge our Privacy Policy. For more information on our data practices and how to exercise your privacy rights, please see our Privacy Policy.