New inks that incorporate nanoparticles are able to adjust amount of radiation that can pass through them, University of Melbourne research shows; innovation could help create coatings for buildings with energy-free heating, cooling properties

Sample article from our R&D/Patents

March 28, 2023 (press release) –


New research uses ‘phase change inks’ to control temperature in everyday environments – reducing our energy consumption for a sustainable climate future

By Dr Mohammad Taha, University of Melbourne

We shouldn’t just focus on energy generation from renewable resources. We also need to look at preserving and reducing our energy consumption as part of any energy solution, as the impacts of climate change become a reality.

Our new research, into new inks that use nanoparticles, published in the Royal Society of Chemistry’s Journal of Materials Chemistry A, has the potential to play an important role in reducing our reliance on energy production.

These inks can adjust the amount of radiation that can pass through them, based on the surrounding environment, and could be used to develop coatings for buildings that enable passive heating and cooling – reducing our need to rely on energy creation to regulate environments.

Passive climate control can reduce the severity of extreme conditions and help create comfortable living conditions without expending energy unnecessarily.

By engineering our inks to respond to their surroundings, we not only reduce energy expenditure, but negate the need for auxiliary control systems to adjust temperatures­ – these controls, like air conditioning or gas heating, are additional energy waste.

Earlier research has explored one of the main components of ‘phase change materials’ – vanadium oxide (VO₂). These materials use triggers, like heat, electricity or some other type of strain, which would create enough energy for the material to transform itself under stress.

But until now, we’ve been limited in how we can use phase change materials because they needed to be heated to very high temperatures to activate their ‘phase changing’ properties.

In practice, this meant we couldn’t use it on many surfaces, we couldn’t achieve the temperature levels necessary to activate the change in most environments, and the methods used weren’t scalable.


Vanadium oxides are highly promising materials for heat retardant coatings because they can undergo insulator-to-metal transition (IMT) – basically acting as a switch, blocking heat beyond a particular temperature.

But this transition typically occurs at 68°C – it’s worth noting that, according to the Guinness Book of Records, the hottest temperature recorded on Earth is 56.7°C in Death Valley.

So, it’s safe to say that this high temperature transition makes it unsuitable for passive climate control in most household and industrial settings.

In our research, we used our understanding of how these materials are put together to test how we could trigger the IMT reaction at more practical temperatures of around 30-40°C.

Our team identified two ways to do this.

In the first, we changed the properties of the material itself to create a much more strained compound. This increased strain creates more energy, so the transformation process is triggered at lower temperatures.

The second way was to surround the molecule in glass nano-spheres, which introduces an external stressor – again, ramping up the strain increases the energy to the molecule, which activates its transformative properties.


Our printable material is a proof-of-concept that’s versatile and adaptable – it can be laminated, sprayed or added to paints and building materials. These semiconductors can also be incorporated into clothing, regulating body temperature in extreme environments, or in the creation of large-scale, flexible electronic devices.

The next step involves taking our research, which has been patented by the University of Melbourne, to production – which will be affordable and simple.

It removes the previous restrictions on applying these inks on a large scale cheaply – this means we can easily retrofit existing structures and building materials. With manufacturing interest, it’s likely to take five to 10 years to reach market.

The potential of this material is huge as it can be used for so many different purposes, like preventing heat build-up in laptop electronics or protecting car windshields.

But the beauty of this material is that we can adjust its heat absorption properties to suit our needs. For instance, we can raise the IMT to keep greenhouses warm, or set it to room temperature to keep our houses comfortable.


Industry Intelligence Editor's Note: This article has been republished with permission. Third-party images from the original publication have been excluded.
To view the original article, click here. To view more information on the terms of use of this article, click here.

* All content is copyrighted by Industry Intelligence, or the original respective author or source. You may not recirculate, redistrubte or publish the analysis and presentation included in the service without Industry Intelligence's prior written consent. Please review our terms of use.

See our dashboard in action - schedule an demo
Chelsey Quick
Chelsey Quick
- VP Client Success -

We offer built-to-order r&d/patents coverage for our clients. Contact us for a free consultation.

About Us

We deliver market news & information relevant to your business.

We monitor all your market drivers.

We aggregate, curate, filter and map your specific needs.

We deliver the right information to the right person at the right time.

Our Contacts

1990 S Bundy Dr. Suite #380,
Los Angeles, CA 90025

+1 (310) 553 0008

About Cookies On This Site

We collect data, including through use of cookies and similar technology ("cookies") that enchance the online experience. By clicking "I agree", you agree to our cookies, agree to bound by our Terms of Use, and acknowledge our Privacy Policy. For more information on our data practices and how to exercise your privacy rights, please see our Privacy Policy.