Baldwin Technology to showcase its sustainable TexCoat G4 finishing system at International Textile Machinery Exhibition in Istanbul, June 14-18, and Techtextil, Texprocess trade fairs in Germany, June 21-24

Baldwin Technology Company Inc. will showcase its highly sustainable TexCoat™ G4 finishing system in hall 12, booth 1211, at the International Textile Machinery Exhibition, held June 14 to 18 in Istanbul. The system also will be on display in hall 12, booth D-79, at the Techtextil and Texprocess trade fairs, taking place June 21 to 24 in Frankfurt, Germany. The revolutionary TexCoat G4 non-contact precision-spray technology helps textile finishers up their game by enabling consistent, high-quality finishing, with zero chemistry waste and drastically minimized water and energy consumption.

With a cost-sensitive global economy and an increased focus by brands and consumers on the environment, customers are placing a premium on sustainability in textile production. TexCoat G4’s non-contact spray technology offers numerous advantages compared to conventional methods of applying finishing chemistry. With Baldwin’s innovative system, the chemistry is precisely distributed across the textile surface and is applied only where it is required, on one or both sides of the fabric. The non-contact technology eliminates chemistry dilution in wet-on-wet processes, allowing full control of maintaining consistent chemistry coverage rates. Plus, pad bath contamination is eliminated, and changeovers are only required when there is a change of finish chemistry.

More specifically, with Baldwin’s TexCoat G4, textile finishers can expect unprecedented tracking and control of the finishing process for consistent quality. Changeovers are easily and quickly performed, thanks to recipe management, including automated chemistry and coverage selection. Furthermore, the system offers automated speed tracking, fabric-width compensation, and real-time monitoring to track system uptime, performance and chemistry usage, as well as active care alerts.

In addition, the TexCoat G4 system can process a wide range of low-viscosity water-based chemicals, such as durable water repellents, softeners, anti-microbials, flame retardants and more. Baldwin’s innovative technology utilizes the same chemicals used in the traditional pad bath, and no special auxiliaries are required. The recipe is adjusted by increasing the concentration and reducing the pickup by a corresponding amount, so that the same level of solids is applied. Some applications, such as durable water repellents, are only applied on the face of the fabric, instead of the traditional method of saturation through dipping and squeezing. Drier fabric entering the stenter means lower drying temperatures and faster process speeds. Single-side applications also open up the opportunity to process back-coated or laminated fabrics in a single pass of the stenter, instead of two passes.

“We are looking forward to very busy exhibitions, especially with sustainability challenges being such a high priority for fabric producers and brands,” said Rick Stanford, Baldwin’s Vice President of Global Business Development, Textiles. “Energy and chemical costs are skyrocketing, and our TexCoat G4 is the ultimate tool to assist manufacturers in managing these costs in the finishing department.”

ABOUT BALDWIN TECHNOLOGY COMPANY INC.

Baldwin Technology Company Inc. is a leading global manufacturer and supplier of innovative process-automation equipment, parts, service and consumables for the printing, packaging, textile, plastic film extrusion and corrugated industries. As a total solutions provider, Baldwin offers our customers a broad range of market-leading technologies, with a focus on improving the economic and environmental efficiency of production processes. Through a global footprint of 21 company-owned locations and an extensive network of partners, our customers are supported globally, regionally and locally by dedicated sales and service team members who add value by forming long-term relationships. Baldwin is privately owned by BW Forsyth Partners, a Barry-Wehmiller company. For more, visit baldwintech.com.

ABOUT BW FORSYTH PARTNERS

BW Forsyth Partners is the investment arm of multibillion-dollar global manufacturing and engineering consulting firm Barry-Wehmiller. Established in 2009, BW Forsyth Partners blends Barry-Wehmiller’s unparalleled legacy of value creation and people-centric culture development with keen investing experience to help companies realize their true potential. With a focus limited to areas known well, BW Forsyth Partners seeks to partner with leadership teams to acquire small- to middle-market companies in the capital and component equipment, and professional services sectors. In each of our operating companies, BW Forsyth Partners deploys operational improvements and strategy development without compromising the autonomy, strategic vision and entrepreneurial spirit of their leadership teams. For more information, visit bwforsyth.com.