VTT's PlastBug project studies microbes to break down pre-treated plastic waste; researchers believe they may be able to engineer bacteria that can process plastic instead of sugar, wood as carbon sources, or to produce biodegradable plastic products

Sample article from our Transformation & Innovation

ESPOO, Finland , October 31, 2022 (press release) –

Plastic waste ending up in oceans and nature is a major concern. The PlastBug project has looked into powerful microbes to break down plastics so that they can be turned into new raw materials. Kari Koivuranta and Jukka Niskanen share how the VTT iBEX innovation programme is developing the process of breaking down plastic waste with microbes. VTT’s expertise in biotechnology and chemistry has been a great asset in this research.

In recent years, researchers at VTT have identified microbes that break down different kinds of plastics and investigated which of their enzymes break down the plastics. As a result, there are already a few enzyme-related patents pending. 

The production of plastics increases worldwide, and so does the amount of plastics waste. Plastic recycling is still inadequate, so a large part of plastic waste ends up being incinerated or in landfills. 

Plastics contain a large amount of carbon that could be reused in new raw materials. 

The PlastBug project has investigated how microbes with their enzymes can break down and digest different types of plastics and turn them into biodegradable materials such as fatty acids. Researchers are now developing chemical pre-treatment for plastics to make the break down process faster in the Degradable Polyolefins project. This way, the recycling of plastic waste becomes more effective, as the carbon contained in plastics becomes available for reuse. 

“We mainly focus our research on polyethene and polypropene, which are the most common plastics in the world. These types of plastics are abundant in plastic waste, and they aren’t being fully reused. The biotechnological recycling of polyethene and polypropene hasn’t been researched widely, unlike PET plastics, for example”, explains VTT Principal Scientist Kari Koivuranta.

Pre-treatment makes plastics break down faster

VTT has already identified enzymes suitable for breaking down polyethene and polypropene. 

“The downside of breaking down plastics this way is that it’s slow, which is due to the properties of the plastics. They are hard, durable and water-repellent, preventing the microbes and enzymes from getting into their surfaces”, says Koivuranta. 

Additives used in plastics can also slow down the break down process: “Plastic isn’t synonymous with polymer: plastics consist of polymers and often contain additives. Additives improve the properties of plastics, but they may prevent microbial processing. Pre-treatment methods can help to decrease the amount of additives while the plastics are oxidised”, says VTT Senior Scientist Jukka Niskanen.

VTT is looking into how different pre-treatment methods affect the ability of enzymes to digest plastics. Oxidation is one way to improve the mixing of plastics in water and make the process faster. This research is facilitated by VTT’s expertise in plastics and polymer chemistry, while using industrially available methods. 

Broken-down plastics turns into fatty acids

By breaking down plastics with microbes, enzymes and suitable pre-treatment, the carbon contained in plastics could be reused in the future. With the help of microbes, the materials created by breaking down plastics could be used to produce new biodegradable materials.

“Microbes can produce new materials from carbon sources, and this is already happening on an industrial scale. In the future, the carbon source could be plastic waste instead of sugars or wood, which we can use in other ways. Plastics also contain in general more carbon per gram compared to sugars, for example”, says Niskanen. 

Carbon from plastic waste could be used to produce biodegradable material. Microbe strains can be adjusted to produce a certain product – such as biodegradable PHA (polyhydroxyalkanoate) plastic or fatty acids. One practical application of fatty acids is manufacturing raw materials for new plastics, and any excess material from the process would be used to grow new biomass.

Complementing current recycling methods

Recycling plastics is a challenge: even though plastics are being sorted, the majority of them end up being disposed of. Instead of competing with current recycling methods, the biotechnological recycling of plastics will be a complementary process. The aim is that the recyclable plastic could contain different types of plastics, and most of it could be reused.

The status of biotechnological plastic recycling is still unclear, and there are no existing ecosystems for utilising biodegradable materials produced from plastic waste. Likewise, there are no established terms or names for the products created by the process. VTT hopes to spark up conversation around this topic. 

“So far, polyester has been used to biotechnologically produce comparable new polyesters, but there are no public examples of using plastic waste in general to produce biodegradable material. But this will be possible in the future: it may only be 5 to 10 years until we can use oil-based materials to make biodegradable and biocompatible materials”, Koivuranta says.

* All content is copyrighted by Industry Intelligence, or the original respective author or source. You may not recirculate, redistrubte or publish the analysis and presentation included in the service without Industry Intelligence's prior written consent. Please review our terms of use.

See our dashboard in action - schedule an demo
Jason Irving
Jason Irving
- SVP Enterprise Solutions -

We offer built-to-order transformation & innovation coverage for our clients. Contact us for a free consultation.

About Us

We deliver market news & information relevant to your business.

We monitor all your market drivers.

We aggregate, curate, filter and map your specific needs.

We deliver the right information to the right person at the right time.

Our Contacts

1990 S Bundy Dr. Suite #380,
Los Angeles, CA 90025

+1 (310) 553 0008

About Cookies On This Site

We collect data, including through use of cookies and similar technology ("cookies") that enchance the online experience. By clicking "I agree", you agree to our cookies, agree to bound by our Terms of Use, and acknowledge our Privacy Policy. For more information on our data practices and how to exercise your privacy rights, please see our Privacy Policy.