Washington State University researchers develop process to repurpose PP fibers from used face masks for strengthening concrete; cement mixture shows 47% greater strength, and repurposed fibers offer low-cost option compared to common cement microfibers

Sample article from our R&D/Patents

PULLMAN, Washington , May 13, 2022 (press release) –

The WSU researchers developed a process to fabricate tiny mask fibers, ranging from five to 30 millimeters in length, and then added them to cement concrete to strengthen it and to prevent its cracking.

With the pervasive single-use masks during the pandemic now presenting an environmental problem, researchers have demonstrated the idea of incorporating old masks into a cement mixture to create stronger, more durable concrete. 

In a paper published in the journal, Materials Letters, a Washington State University research team showed that the mixture using mask materials was 47% stronger than commonly used cement after a month of curing. 

“These waste masks actually could be a valuable commodity if you process them properly,” said Xianming Shi, professor and interim chair of the Department of Civil and Environmental Engineering and the corresponding author on the paper. “I’m always looking out for waste streams, and my first reaction is ‘how do I turn that into something usable in concrete or asphalt?’”

Production of cement is a carbon-intensive process, responsible for as much as 8% of carbon emissions worldwide. Microfibers are already sometimes added to cement concrete to strengthen it, but they’re expensive. The microfiber-reinforced concrete can potentially reduce the amount of cement needed for a project or make the concrete last longer, saving carbon emissions as well as money for builders and owners.

Made of a polypropylene or polyester fabric where it contacts the skin and an ultra-fine polypropylene fiber for the filtering layers, medical masks have fibers that can be useful for the concrete industry. If they are not reused, disposable masks can remain in the environment for decades and pose a risk for the ecosystem. 

“This work showcases one technology to divert the used masks from the waste stream to a high-value application,” Shi said. 

In their proof-of-concept work, the researchers developed a process to fabricate tiny mask fibers, ranging from five to 30 millimeters in length, and then added them to cement concrete to strengthen it and to prevent its cracking. For their testing, they removed the metal and cotton loops from the masks, cut them up and incorporated them into ordinary Portland cement, the most common type of cement used around the world and the basic ingredient for concrete, mortar and grout.  

They mixed the mask microfibers into a solution of graphene oxide before adding the mixture to cement paste. The graphene oxide provides ultrathin layers that strongly adhere to the fiber surfaces. Such mask microfibers absorb or dissipate the fracture energy that would contribute to tiny cracks in the concrete. Without the fibers, these microscopic cracks would eventually lead to wider cracks and the material’s failure. 

The researchers are conducting more studies to test their idea that the graphene oxide-treated microfibers could also improve the durability of the concrete and protect it from frost damage and from deicing chemicals that are used on roadways. They also envision applying this technology to the recycling of other polymer materials, such as discarded clothing, to incentivize the collection of such waste.

Zhipeng Li, a graduate student in WSU’s Department of Civil and Environmental Engineering, led the work, which was funded through the U.S. Department of Transportation’s National Center for Transportation Infrastructure Durability and Life Extension.

Media Contacts

Xianming Shi, Department of Civil and Environmental Engineering, 509-335-7088, xianming.shi@wsu.edu
Tina Hilding, Voiland College of Engineering and Architecture Communications, 509-335-5095, thilding@wsu.edu

* All content is copyrighted by Industry Intelligence, or the original respective author or source. You may not recirculate, redistrubte or publish the analysis and presentation included in the service without Industry Intelligence's prior written consent. Please review our terms of use.

See our dashboard in action - schedule an demo
Chelsey Quick
Chelsey Quick
- VP Client Success -

We offer built-to-order r&d/patents coverage for our clients. Contact us for a free consultation.

About Us

We deliver market news & information relevant to your business.

We monitor all your market drivers.

We aggregate, curate, filter and map your specific needs.

We deliver the right information to the right person at the right time.

Our Contacts

1990 S Bundy Dr. Suite #380,
Los Angeles, CA 90025

+1 (310) 553 0008

About Cookies On This Site

We collect data, including through use of cookies and similar technology ("cookies") that enchance the online experience. By clicking "I agree", you agree to our cookies, agree to bound by our Terms of Use, and acknowledge our Privacy Policy. For more information on our data practices and how to exercise your privacy rights, please see our Privacy Policy.