VTT to spin out new company, Olefy Technologies, applies for eight patents; Olefy's gasification technology can extract over 70% virgin-grade plastics, chemical raw material components from plastic waste via single-step, contaminant-tolerant process

Sample article from our R&D/Patents

ESPOO, Finland , August 16, 2022 (press release) –

After four decades of thermal conversion technology development, VTT is spinning out Olefy technology in October – a process that can affordably convert most of the world’s waste plastics back to usable virgin grade materials an infinite number of times. VTT also announces eight patent applications for the process.

VTT has announced its plan to spin out a new company – Olefy Technologies. Its patent-pending technology can extract over 70% virgin grade plastics and chemical raw materials components from plastic waste. The new process can be done in a single step, majorly reducing the cost of plastic recycling and making recycling a preferred option for massive amounts of landfill-bound plastic waste that current methods are unable to process.

Today, only 8–10% of global plastics gets recycled primarily through mechanical recycling. However, only a limited share of plastic waste can be mechanically recycled. Furthermore, the resulting recycled plastic cannot be used in food packaging and pharma applications.

Most plastic waste ends up in landfills. The opportunity to get virgin quality plastic from previously unusable plastic waste means that with Olefy it is economically viable to recycle most of the world’s plastics with minimal sorting by consumers and businesses. 

“Plastic waste is one of the five major global problems that VTT has strategically set itself to solve,” says Antti Vasara, CEO of VTT. “Olefy is a quantum leap in recycling that will change the way the world views plastic by making it truly circular and guiding us even faster towards carbon neutrality.”  

A major advantage of the virgin quality materials produced from the Olefy process enables plastic to be recycled an infinite number of times. 

“One of the problems with current recycling methods is that the quality degrades every time plastic is recycled. After several rounds of mechanical recycling, the quality becomes too poor, and the plastic is no longer usable and goes to a landfill. With the Olefy recycling process, the quality of the plastic is equal to virgin grade, so it can be recycled indefinitely and materials no longer need to end up in landfills,” says Matti Nieminen, Head of Technology at Olefy. “In essence, Olefy will make it possible for plastic to be a true part of the circular economy.”

Naphtha is a crude oil product normally needed for conventional plastic manufacturing. Olefy’s new technology eliminates the need for naphtha feedstock and is also able to produce enough energy for the process. 

“The economic benefits of having virgin grade components from recycled materials can completely change the dynamic of global oil consumption. Olefy will significantly reduce the need to use new oil for making plastic and maybe even create a new economic incentive to clean up plastic from land and water as it becomes a valued commodity,” concludes Nieminen.

Major consumer product companies have set ambitious targets for incorporating recycled plastic into their products as well as packages – a typical goal being 25% of their total packaging by 2025. Around the world, demand for sustainable and recycled plastics is higher than ever. Essentially, with the Olefy process, it takes the same amount of ethylene or propylene based waste plastic as higher-cost naphtha feedstock to produce a ton of virgin grade plastic material.

At the same time, the process itself lowers the cost of production of recycled plastic so significantly that it can lower the bar for global companies to use it as a higher percentage of recycled material in their products and packaging.

“Demand for recycled plastics is growing much faster than the supply,” says Timo Sokka, Head of Business at Olefy. “All major brand owners are committed to fighting climate change, and they are responding to consumers' growing concerns on waste accumulation by utilizing recycled materials in their products. Olefy responds perfectly to these challenges by making plastics recycling truly feasible on an industrial scale.”  

There are about 500 industrial steam cracker operations around the world. A steam cracker is a petrochemical plant that breaks down light hydrocarbons, such as ethane, propane, and light naphtha, to produce ethylene. Olefy’s new technologies economically open up a new world and value for plastic waste for these facilities. 

“This technology enables direct parallel integration of the Olefy modules into existing steam cracker sites around the world to effectively produce virgin grade olefins, which are converted back to virgin grade plastics. Significantly lower capital expenditure requirements, accelerating market demand, and price premiums make these investments also very attractive for the steam cracker operators,” Sokka continues.

The working Olefy pilot is successfully running at VTT Bioruukki Pilot Centre in Espoo, Finland. The company is currently discussing partnerships and negotiating with investors for scaling, business development, and licensing of the technology.  The first industrial demonstration operation is expected to be operational by 2026.

Olefy’s technology has been developed as part of VTT LaunchPad, a science-based incubator, where VTT researchers and technology are brought together with business expertise and investors to renew industries. VTT LaunchPad supports incubator teams to develop VTT-owned IPR into fundable spin-off companies.
 

Olefy technology shortly

  • Olefy is a novel industrial scale technology capable of recycling even low quality plastic waste in order to manufacture high value virgin grade plastics.
  • The Olefy process is based on gasification. It breaks plastic waste into olefins and other valuable hydrocarbons.
  • Yield of material recycling is as high as 70% of the feedstock.
  • The product molecules created with the Olefy process are equal to oil-based virgin olefins (pharma and food quality).
  • The robust process is tolerant to contaminants in the feed. This means easier pretreatment of the feed before the Olefy processing.
  • The process components are based on mature technology. 
  • Technology readiness level (TRL) 5. 
  • Eight patents are pending.

Further information
Matti Nieminen, 
Principal Scientist, VTT Technical Research Centre of Finland Ltd
Head of Technology, Olefy Technologies
tel. +358 405442262
matti.nieminen@vtt.fi 

Timo Sokka
Head of Business, Olefy Technologies
tel. +358 405832908
timo.sokka@olefytech.com 

* All content is copyrighted by Industry Intelligence, or the original respective author or source. You may not recirculate, redistrubte or publish the analysis and presentation included in the service without Industry Intelligence's prior written consent. Please review our terms of use.

See our dashboard in action - schedule an demo
Chelsey Quick
Chelsey Quick
- VP Client Success -

We offer built-to-order r&d/patents coverage for our clients. Contact us for a free consultation.

About Us

We deliver market news & information relevant to your business.

We monitor all your market drivers.

We aggregate, curate, filter and map your specific needs.

We deliver the right information to the right person at the right time.

Our Contacts

1990 S Bundy Dr. Suite #380,
Los Angeles, CA 90025

+1 (310) 553 0008

About Cookies On This Site

We collect data, including through use of cookies and similar technology ("cookies") that enchance the online experience. By clicking "I agree", you agree to our cookies, agree to bound by our Terms of Use, and acknowledge our Privacy Policy. For more information on our data practices and how to exercise your privacy rights, please see our Privacy Policy.