Scientists design new technique to recover metals from end-of-life Li-ion batteries using supercritical CO2; technique is less energy intensive than conventional methods, produces less waste, extracts lithium, nickel, cobalt, manganese at 90% efficiency

Sample article from our R&D/Patents

TORONTO , October 20, 2022 (press release) –

University of Toronto Engineering researchers are using supercritical carbon dioxide to recover lithium, cobalt, nickel and manganese from end-of-life lithium-ion batteries

As the sales of electric vehicles (EV) continue to surge worldwide, demand for metals needed to build lithium-ion batteries is surging along with it. A new technique developed by Professor Gisele Azimi could help meet this challenge by changing the way that such batteries are recycled.  

Azimi and her team at University of Toronto Engineering’s Laboratory for Strategic Materials, have proposed a new, more sustainable method to mine valuable metals — including lithium, but also cobalt, nickel and manganese — from lithium-ion batteries that have reached the end of their useful lifespan.   

“Getting these metals from raw ore takes a lot of energy,” says PhD candidate Jiakai (Kevin) Zhang, lead author on a new paper recently published in Resources, Conservation and Recycling.   

Conventional processes for recycling lithium-ion batteries are based on pyrometallurgy, which uses extremely high temperature, or hydrometallurgy, which uses acids and reducing agents for extraction. These two processes are both energy intensive: pyrometallurgy produces greenhouse gas emissions; while hydrometallurgy creates wastewater that needs to be processed and handled.  

In contrast, Azimi’s lab group is using supercritical fluid extraction to recover metals from end-of-life lithium-ion batteries. This process separates one component from another by using an extracting solvent at a temperature and pressure above its critical point — where it adopts the properties of both a liquid and a gas.  

To recover the metals, Zhang used carbon dioxide as a solvent, which was brought to supercritical phase by increasing the temperature above 31 Celsius, and the pressure up to 7 megapascals.  

In the paper, the team showed that this process matched the extraction efficiency of lithium, nickel, cobalt and manganese to 90% when compared to the conventional leaching processes, while also using fewer chemicals and generating significantly less secondary waste. In fact, the main source of energy expended during the supercritical fluid extraction process was due to the compression of the carbon dioxide.  

“The advantage of our method is that we are using carbon dioxide from the air as the solvent instead of highly hazardous acids or bases,” she says. “Carbon dioxide is abundant, cheap and inert, and it’s also easy to handle, vent and recycle.”   

Supercritical fluid extraction is not a new process. It has been used in the food and pharmaceutical industries to extract caffeine from coffee beans since the 1970s. Azimi and her team’s work builds on previous research in the lab to recover rare earth elements from nickel-metal-hydride batteries. 

 However, this is the first time that this process has been used to recover metals from lithium-ion batteries, she says.  

 “We really believe in the success and the benefits of this process,” says Azimi.  

“We are now moving towards commercialization of this method to increase its technology readiness level. Our next step is to finalize partnerships to build industrial-scale recycling facilities for secondary resources. If it’s enabled, it would be a big game changer.” 

“If we recycle existing batteries, we can sustain the constrained supply chain and help bring down the cost of EV batteries, making the vehicles more affordable.” 

Part of Canada’s commitment to reach net-zero emissions by 2050 includes a mandatory target requiring 100% of new light-duty cars and passenger trucks sold in the country to be electric by 2035.  

Achieving this target will require an increase in the supply of critical metals, the price of which is already very high. For example, cobalt, a key ingredient in the cathode production of lithium-nickel-manganese-cobalt-oxide (commonly abbreviated as NMC) batteries widely used in EVs, is also one of the most expensive components of lithium-ion batteries due to its limited reserve.  

“We are about to reach a point where many lithium-ion batteries are reaching their end of life,” says Azimi. “These batteries are still very rich in elements of interest and can provide a crucial resource for recovery.” 

Not only can recycling provide these materials at a lower cost, but it also reduces the need to mine raw ore that comes with environmental and ethicalcosts. 

The life expectancy of EV batteries is from 10 to 20 years, but most car manufacturers only provide a guarantee for eight years or 160,000 km — whichever comes first. When EV batteries reach end of life, they can be refurbished for second life uses or recycled to recover metals. But today, many batteries are discarded improperly and end up in landfills.  

“If we keep mining lithium, cobalt and nickel for batteries and then just landfill them at end of life, there will be a negative environmental impact, especially if corrosive electrolyte leaching occurs and contaminates underground water systems,” says Zhang.

Media Contact

Fahad Pinto
University of Toronto Faculty of Applied Science & Engineering
Office: 416-978-4498

Resources Conservation and Recycling


* All content is copyrighted by Industry Intelligence, or the original respective author or source. You may not recirculate, redistrubte or publish the analysis and presentation included in the service without Industry Intelligence's prior written consent. Please review our terms of use.

See our dashboard in action - schedule an demo
Chelsey Quick
Chelsey Quick
- VP Client Success -

We offer built-to-order r&d/patents coverage for our clients. Contact us for a free consultation.

About Us

We deliver market news & information relevant to your business.

We monitor all your market drivers.

We aggregate, curate, filter and map your specific needs.

We deliver the right information to the right person at the right time.

Our Contacts

1990 S Bundy Dr. Suite #380,
Los Angeles, CA 90025

+1 (310) 553 0008

About Cookies On This Site

We collect data, including through use of cookies and similar technology ("cookies") that enchance the online experience. By clicking "I agree", you agree to our cookies, agree to bound by our Terms of Use, and acknowledge our Privacy Policy. For more information on our data practices and how to exercise your privacy rights, please see our Privacy Policy.