Evonik introduces COATINO Defect Detection, a digital tool for analysis of coated test samples; tool offers a helpful addition to visual analysis for coating defects such as foaming

Sample article from our Chemicals Industry

ESSEN, Germany , August 31, 2022 (press release) –

 

Evonik's Coating Additives business line has developed a new tool for the digital analysis of coated test samples: COATINO® Defect Detection (CDD).

  • Objective defect evaluation through innovative digital image recognition
  • Quantifiable and reproducible results
  • Initial focus on pigmented systems in the architectural sector

Evonik's Coating Additives business line has developed a new tool for the digital analysis of coated test samples: COATINO® Defect Detection (CDD), which precisely and objectively detects and evaluates coating defects. Within a few seconds the system delivers quantifiable results.

So far, laboratory personnel have had to rely on visually evaluating samples when developing a new formulation. Many samples must be carefully compared and evaluated. This routine work is very time-consuming, especially for larger test series, and thus noticeably limits the scope for innovation. "COATINO® Defect Detection simplifies our customers' daily laboratory routine and frees them up for other important tasks," explains Oliver Kröhl, Head of Strategic Business Development at Coating Additives. "In addition, our digital solution delivers objectively reproducible results. This means that the evaluation of test samples no longer depends on the subjective assessment of laboratory personnel."

Innovative image recognition methods

The Defect Detection, part of Evonik Coating Additives' COATINO® formulation network, saves lab experts a lot of time: They use a camera connected to the computer to photograph the coated samples. Within seconds the tool assesses them, using innovative image recognition methods.

Coating defects are evaluated to an accuracy of a tenth of a percent and processed in a clear manner. "For example, you can immediately see what percentage of the surface is affected by foam," says Philipp Isken, COATINO® Product Development. “Reference formulations or blank samples can also be added to more clearly highlight the performance of the tested formulations. Based on the data, you can select the best formulation for the specific application."

COATINO® Defect Detection was initially developed for pigmented systems in the architectural sector. For formulations with defoamers, the tool measures defects such as micro- and macrofoam, cratering, and incompatibilities. The Coating Additives business line plans to add more industries and defect types to the tool. In the next stage of development, the Defect Detection will also independently suggest new formulations. Existing measurement results and the comparison of test series will serve as the data basis for these improved formulations.

COATINO® Defect Detection simplifies everyday laboratory work

The tool is easy to use: The application runs browser-based, so no software needs to be installed on the PC. The test series are documented in the system and can thus be retrieved at any time. An integrated help center provides detailed answers to all questions regarding the required hardware or individual application steps.

COATINO® Defect Detection is initially available free of charge to all registered users at www.coatino.com.

Visit also our Evonik Coating Additives LinkedIn page!

 

COMPANY INFORMATION
Evonik is one of the world leaders in specialty chemicals. The company is active in more than 100 countries around the world and generated sales of €15 billion and an operating profit (adjusted EBITDA) of €2.38 billion in 2021. Evonik goes far beyond chemistry to create innovative, profitable and sustainable solutions for customers. About 33,000 employees work together for a common purpose: We want to improve life today and tomorrow.

DISCLAIMER
In so far as forecasts or expectations are expressed in this press release or where our statements concern the future, these forecasts, expectations or statements may involve known or unknown risks and uncertainties. Actual results or developments may vary, depending on changes in the operating environment. Neither Evonik Industries AG nor its group companies assume an obligation to update the forecasts, expectations or statements contained in this release.

* All content is copyrighted by Industry Intelligence, or the original respective author or source. You may not recirculate, redistrubte or publish the analysis and presentation included in the service without Industry Intelligence's prior written consent. Please review our terms of use.

More from our Chemicals Industry Coverage
See our dashboard in action - schedule an demo
Jason Irving
Jason Irving
- SVP Enterprise Solutions -

We offer built-to-order chemicals industry coverage for our clients. Contact us for a free consultation.

About Us

We deliver market news & information relevant to your business.

We monitor all your market drivers.

We aggregate, curate, filter and map your specific needs.

We deliver the right information to the right person at the right time.

Our Contacts

1990 S Bundy Dr. Suite #380,
Los Angeles, CA 90025

+1 (310) 553 0008

About Cookies On This Site

We collect data, including through use of cookies and similar technology ("cookies") that enchance the online experience. By clicking "I agree", you agree to our cookies, agree to bound by our Terms of Use, and acknowledge our Privacy Policy. For more information on our data practices and how to exercise your privacy rights, please see our Privacy Policy.