Washington State University researchers develop method to recycle polylactic acid plastic waste into high-quality resin for 3D printing; recycled PLA resin exhibits equal or better mechanical, thermal properties than commercially available resins

Sample article from our Bioeconomy

PULLMAN, Washington , August 31, 2022 (press release) –

The WSU research team, including postdoctoral researcher Yu-Chung Chang, used PLA plastic waste to create a high-quality resin for 3D printing.

A method to convert a commonly thrown-away plastic to a resin used in 3D-printing could allow for making better use of plastic waste. 

A team of Washington State University researchers developed a simple and efficient way to convert polylactic acid (PLA), a bio-based plastic used in products such as filament, plastic silverware and food packaging to a high-quality resin. 

“We found a way to immediately turn this into something that’s stronger and better, and we hope that will provide people the incentive to upcycle this stuff instead of just toss it away,” said Yu-Chung Chang, a postdoctoral researcher in the WSU School of Mechanical and Materials Engineering and a co-corresponding author on the work. “We made stronger materials just straight out of trash. We believe this could be a great opportunity.”

About 300,000 tons of PLA are produced annually, and its use is increasing dramatically.  

A method to convert a commonly thrown-away plastic to a resin used in 3D-printing could allow for making better use of plastic waste.
Although it’s bio-based, PLA, which is categorized as a #7 plastic, doesn’t break down easily. It can float in fresh or salt water for a year without degrading. It is also rarely recycled because like many plastics, when it’s melted down and re-formed, it doesn’t perform as well as the original version and becomes less valuable.

“It’s biodegradable and compostable, but once you look into it, it turns out that it can take up to 100 years for it to decompose in a landfill,” Chang said. “In reality, it still creates a lot of pollution. We want to make sure that when we do start producing PLA on the million-tons scale, we will know how to deal with it.” 

In their study, published in the journal, Green Chemistry, the researchers, led by Professor Jinwen Zhang in the School of Mechanical and Materials Engineering, developed a fast and catalyst-free method to recycle the PLA, breaking the long chain of molecules down into simple monomers – the building blocks for many plastics. The entire chemical process can be done at mild temperatures in about two days. The chemical they used to break down the PLA, aminoethanol, is also inexpensive.

“If you want to rebuild a Lego castle into a car, you have to break it down brick by brick,” Chang said. “That’s what we did. The aminoethanol precision-cut the PLA back to a monomer, and once it’s back to a monomer, the sky’s the limit because you can re-polymerize it into something stronger.”

Once the PLA was broken down to its basic building blocks, the researchers rebuilt the plastic and created a type of photo-curable liquid resin that is commonly used as printing “ink” for 3D printers. When it was used in a 3D printer and cured into plastic pieces, the product showed equal or better mechanical and thermal properties than commercially available resins. 

While the researchers focused on PLA for the study, they hope to apply the work to polyethylene terephthalate (PET), which is more common than PLA, has a similar chemical structure and presents a bigger waste problem. 

They have filed a provisional patent and are working to further optimize the process. The researchers are also looking into other applications for the upcycling method. 

Media Contacts

Jinwen Zhang, professor, WSU School of Mechanical and Materials Engineering, jwzhang@wsu.edu

Yu-Chung Chang, postdoctoral researcher, WSU School of Mechanical and Materials Engineering, yu-chung.chang@wsu.edu

Tina Hilding, Voiland College of Engineering and Architecture Communications, 509-335-5095, thilding@wsu.edu

* All content is copyrighted by Industry Intelligence, or the original respective author or source. You may not recirculate, redistrubte or publish the analysis and presentation included in the service without Industry Intelligence's prior written consent. Please review our terms of use.

See our dashboard in action - schedule an demo
Chelsey Quick
Chelsey Quick
- VP Client Success -

We offer built-to-order bioeconomy coverage for our clients. Contact us for a free consultation.

About Us

We deliver market news & information relevant to your business.

We monitor all your market drivers.

We aggregate, curate, filter and map your specific needs.

We deliver the right information to the right person at the right time.

Our Contacts

1990 S Bundy Dr. Suite #380,
Los Angeles, CA 90025

+1 (310) 553 0008

About Cookies On This Site

We collect data, including through use of cookies and similar technology ("cookies") that enchance the online experience. By clicking "I agree", you agree to our cookies, agree to bound by our Terms of Use, and acknowledge our Privacy Policy. For more information on our data practices and how to exercise your privacy rights, please see our Privacy Policy.