EconCore and Flaxco develop sustainable lightweight thermoplastic honeycomb sandwich panel with flax fiber composites to replace glass and carbon fiber materials; its many potential commercial applications include automotive interiors and computer casings

Sample article from our Automobile Industry

LEUVEN, Belgium , April 8, 2022 (press release) –

EconCore, world leader in technologies for economic honeycomb sandwich production, has collaborated with partner Flaxco®, to develop and manufacture an innovative new thermoplastic honeycomb sandwich panel.

Flaxco established themselves in the early 1850’s and have 150 years of experience in flax weaving, used in a range of applications including clothing, upholstery and decoration. This has evolved into manufacturing flax fibres for the composites industry, typically found in semi-finished products such as sandwich panels.

In 2020 Flaxco approached EconCore suggesting combination of thermoplastic honeycomb technology with Flaxco’s flax fibre technology. The polypropylene honeycomb material produced by EconCore offers a high-performance-to-weight ratio along with efficient energy absorption.

This is achieved through the materials synonymous honeycomb shaped hollow cells which support sandwich sheets to provide levels of high rigidity with minimal weight. Pioneering the use of flax with honeycomb technology, the partnership sees Flaxco’s flax fabric composite skins combined with EconCore polypropylene core to produce sandwich panels.

In order to generate high level of stiffness, sandwich cores require surface layers, like the neatly woven layers that Flaxco have the means to create. Once created the panels can be thermoformed thanks to their thermoplastic properties. This is typically done by means of short cycle compression moulding.

In order to achieve a product with well-balanced characteristics, pre-pregs of 0.5-1mm thickness were used. By optimising flax technology with the polypropylene honeycomb core Flaxco is able to achieve much higher levels of rigidity. The table below describes the bending performance of a sandwich panel with flax composite skins.

Flax fibres are a 100% natural fibre that produce lower CO2 levels than competitor materials including glass and carbon fibres, an increasingly important element within the automotive industry. Furthermore, research and testing are already underway for the material to find its place within the sports industry.

With high levels of cost efficiency compared to more conventional materials, the new Flaxco composite is expected to be the material of choice in a number of applications, especially those requiring dimensional stability. The new material aims to not only be used in new markets and applications but also replace non-sustainable materials already in use.

Dr. Jochen Pflug, EconCore CEO added: “For new product developments sustainable materials have become a key requirement. Within the automotive industry in particular, suppliers seek sustainable materials which lower their CO2 footprint.”

Dr. Pflug continued: “Flaxco’s natural flax fibre polypropylene composites are an ideal combination with our polypropylene honeycomb cores to achieve a sustainable material that retains high levels of performance. The production costs of thick monolithic laminates are high because many layers need to be combined, our honeycombs increase the stiffness and strength but require only a minimal amount of material in two thin surface layers.”

One factor that has greatly benefitted the partnership between Flaxco and EconCore is the locations of their facilities. With both EconCore and Flaxco being based in Belgium, allowing for a local supply chain. Throughout both the design and manufacturing stages the advantages of this proved its advantages with regular stable deliveries and less transport being required, essential when one crisis after the other affects the transportation chains, from the Coronavirus pandemic to the recent raw material shortages.

Ludwig Ryckebosch, Innovation and Business Development Manager at Flaxco said: “It was a match made in heaven. EconCore’s polypropylene honeycomb has been incredibly easy to work with. Its lightweight properties meant that it was the perfect choice to combine with our technology to develop flax fibre composite material.”

The flax composite material is expected to have commercial applications across many industries, especially automotive interiors and computer casings. With sustainability being a key focus for companies across the globe, this all-new flax composite’s ability to be recycled without compromising on performance will play its role in reducing carbon emissions.

* All content is copyrighted by Industry Intelligence, or the original respective author or source. You may not recirculate, redistrubte or publish the analysis and presentation included in the service without Industry Intelligence's prior written consent. Please review our terms of use.

See our dashboard in action - schedule an demo
Chelsey Quick
Chelsey Quick
- VP Client Success -

We offer built-to-order automobile industry coverage for our clients. Contact us for a free consultation.

About Us

We deliver market news & information relevant to your business.

We monitor all your market drivers.

We aggregate, curate, filter and map your specific needs.

We deliver the right information to the right person at the right time.

Our Contacts

1990 S Bundy Dr. Suite #380,
Los Angeles, CA 90025

+1 (310) 553 0008

About Cookies On This Site

We collect data, including through use of cookies and similar technology ("cookies") that enchance the online experience. By clicking "I agree", you agree to our cookies, agree to bound by our Terms of Use, and acknowledge our Privacy Policy. For more information on our data practices and how to exercise your privacy rights, please see our Privacy Policy.